不銹鋼裝飾管裝飾管嗎1.4313是馬氏體級，耐金屬侵蝕性性好，熱正確清理后耐用度性好。X3CrNiMo13-4鋼的機誡制造能力是致使耐侵蝕性部分中鉬和鎳的高分量。這一些錳鋼增長劑限制了增添級碳分量的必須要——給定有機廢氣濃度大約是于奧氏體不銹鋼裝飾管裝飾管嗎。盡管說鎳分量不太高，但鎳分量約為4%，明顯從而提高了鋼對各式金屬侵蝕性的工作環境的忍受力——首次機誡制造能力。X3CrNiMo13-4鋼觀眾可事情高達模型300℃在溫度下事情的零件和零件，甚至體現在各式金屬侵蝕性的工作環境中的零件，另外保證充分的表面層狀態括抗氯化物本質)。QT650.QT780和QT900狀態下，熱正確清理后最經常交工形鋼。半生產加工設備使用于石油天然氣事情.熱.在冶金工業和生物質能源互聯網行業，渦輪增壓機體現在高溫順溫度過低下.泵.收縮機零件。鋼不舒服合補焊。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50供應商EN1.4313馬氏體裝飾管具備固溶處理形態（+A）情況下、蘸火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，必須要 哪某個必要要跟業務部說明白哦。